Building safety & installations

Reports, smoke hatches, electrical inspections, elevators and collective installations.

Safety reports

Report accidents, malfunctions, dangerous situations, water infiltration, storm damage, elevator problems, … Always mention your name, building and contact details and add overview photos. Email beheer@mysebas.be.

Smoke hatch control beeping

Smoke hatch controls beep periodically (e.g., ±13 months). Reset on the controller (e.g., VELUX): press the small RESET button for 3 seconds and if necessary another 15 seconds on the main button. Problem persists? Email photo of the box.

KEI inspection according to AREI (Book I)

A VME needs a periodic electrical installation inspection. A negative report requires repair and reinspection. Note: private installations must also be inspected within their valid period.

Is a fire escape/smoke detector mandatory?

  • Fire escape: depends on year of construction, municipal rules and permit/fire department conditions; often not retroactive.
  • Smoke detectors: since 2020, optical smoke detectors (EN 14604) are mandatory in all homes/apartments. In stairwells/common parts highly recommended; sometimes mandatory (new construction, assisted living).

How safe is our elevator?

  • At least 4×/year preventive maintenance by maintenance company.
  • 2× to 4×/year inspection by recognized EDTC (e.g., Vinçotte, BTV, Konhef) depending on contract/ISO.
  • Risk analysis after 10 years and then max. every 15 years; mandatory modernizations within 3 years.
Elevator companyPhone
De Lift0800 204 04
Diverso0497 75 06 30
Europa Lift03 6462447
Hugo De Jongh0800 354 56
Kone02 346 21 00
Lift-It014 61 31 48
Lift Technics0472 25 55 63
Lift Service Benelux0496 13 77 75
Lift Service Brasschaat03 334 89 31
Orona056 35 07 01
Otis0800 124 24
Ora Liften03 218 45 73
Schindler0800 170 70
Thyssenkrupp TKE070 233 266

Shared heating & hot water

Heating audit and periodic inspections by recognized technician are mandatory. Respect maintenance and inspection deadlines for gas/oil/solid fuel according to capacity and regulations. Legionella prevention and correct settings are essential for safety and efficiency.